Special Offers

An electronic adventure playground for physical computing, built around the RP2350 chip. Includes a 2.8" LCD screen, a speaker, a mini breadboard, and much more!

Our Explorer lets you play with circuits, build science experiments and prototype tiny robots and inventions. We've incorporated tinkering essentials like:

• a convenient mini breadboard for wiring up components
• servo headers
• analog inputs
• a built in speaker for making beeps and boops
• plenty of general purpose inputs/outputs
• connectors for attaching crocodile leads
• Qw/ST connectors for attaching I2C breakouts

Next to all that lot, there's  a vibrant 320 x 240 pixel IPS LCD screen surrounded by six chunky tactile buttons so you can easily monitor and control what your project is doing. It's all mounted on a nice, sturdy baseboard that's printed with a fancy full colour silkscreen. We've also included some little legs, so you can have it propped up at an angle as well as lying flat, and there's a battery connector on the back so you can keep things portable.

You can buy a Pico Explorer board on its own or as part of a Starter Kit, which also contains a whole bunch of fun components to start tinkering with.

Starter kit contains

• Pimoroni Explorer
• Pimoroni Super Sensor Suite - a fancy new all-in-one Qw/ST stick for environmental, light and movement sensing (featuring BME280, LTR559 and LSM6DS3TR-C)
• A hand picked assortment of components to tinker with - think LEDs, pots, switches, servos, wheels
• Jumper jerky and other cables to connect everything up
• Full kit list coming soon!

Features

• Powered by RP2350B (Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM)
• 16MB of QSPI flash supporting XiP
• 2.8” IPS LCD screen (320 x 240 pixels)
  • Driver IC: ST7789V
  • Luminance: 250 cd/m2
  • Active area: 43.2 x 57.5mm
• USB-C connector for programming and power
• Mini breadboard
• Piezo speaker
• 6x user-controllable switches
• Reset and boot buttons
• 6x crocodile clip terminals
• 4x 3-pin servo outputs
• 6x GPIO and 4x ADC easy access headers, plus 3.3V power and grounds
• 2x Qw/ST (Qwiic/STEMMA QT) connector
• 2-pin JST-PH connector for adding a battery
• Lanyard slot!
• Includes 2x desktop stand feet
• Fully-assembled (no soldering required)
• Programmable with C/C++ or MicroPython
• Dimensions: approx 107mm x 85mm x 16mm (H x W x D, assembled)

Connecting Breakouts

If your breakout has a Qw/ST connector on board, you can plug it straight in with a JST-SH to JST-SH cable, or you can easily connect any of our I2C breakouts with a JST-SH to JST-SH cable coupled with a Qw/ST to Breakout Garden adaptor.

• Breakouts currently compatible with our C++/MicroPython build

About RP2350

The RP2350 chip is the Double Quarter Pounder & Fries to the RP2040's Double Cheeseburger and can have one or more RISC-V burgers instead of either of the M33 ARMs, to stretch the metaphor.

In addition to the modern M33 ARM cores, there are sides of: more PIO capability, a variety of low power states for sipping electrons, a whole security system and some sprinklings of specialist digital video circuits to offload DVI/HDMI output.

You can expect a tasty boost in performance - our "real world" MicroPython tests are running up to 2x faster compared to RP2040, and floating point number crunching in C/C++ is up to 20x faster. The extra on-chip RAM will make a big difference when performing memory intensive operations (such as working with higher resolution displays) and even more can be added thanks to external PSRAM support.

RP2350 comes in two flavours - A (standard) and B (all the pins). The B chip has a stonking 48 usable GPIO pins, including 8 ADCs and 24 PWMs, and features on some of our new products. 

What's in the box?

1 x Pimoroni Explorer

A hilariously oversized but fully functional Raspberry Pi Pico 2 for demos, japes and shenanigans.

Psst, haven't you heard? Megacontrollers are the new microcontrollers. Large is the new little. Chonk is the new smol. Pico Jumbo is a giant (3.5x scale) Raspberry Pi Pico 2 that has the following advantages over the standard sized one:

• The holes and castellations in the ridiculous oversized pads are great for connecting up crocodile/alligator clips - very useful for demo-ing in a classroom, workshop or on the Youtubes.
• It has the ultimate best number one all time no notes Pico upgrade - a reset button.
• Things that are the wrong scale are inherently very funny to us.

You can buy a Pico Jumbo on its own or in a starter kit along with a selection of pleasantly chunky components, so you can experience the pure childlike joy of blinking a big ol' LED or wiring up a big ol' button.

Features

• Raspberry Pi Pico 2 Aboard
• CPU: Dual Arm Cortex-M33 or dual RISC-V Hazard3 processors @150MHz
• Memory: 520 KB on-chip SRAM; 4 MB on-board QSPI flash
• Powered and programmable via micro-USB
• Connect up components to the oversized pads with alligator clips!
• It's big
• Really big
• You might think it's a long way down the road to the shops but that's peanuts compared to Pico Jumbo
• Terrible for embedding in devices
• Reset button ????
• Fully-assembled (no soldering required)
• Includes metal legs for display
• Programmable with C/C++ or MicroPython
• Measurements: 180 mm x 73.5 mm x 5.5mm (L x W x D, approx)

Starter Kit contains

• Pico Jumbo
• Crocodile leads
• 10x big (10mm) LEDs
• 10x big resistors
• An arcade button
• A nice clicky on/off switch
• Micro-USB cable

Notes

• Perhaps you'd like to 3D print yourself some oversized pin headers and an oversized micro USB plug to go with your oversized microcontroller?

About RP2350

The RP2350 chip is the Double Quarter Pounder & Fries to the RP2040's Double Cheeseburger and can have one or more RISC-V burgers instead of either of the M33 ARMs, to stretch the metaphor.

In addition to the modern M33 ARM cores, there are sides of: more PIO capability, a variety of low power states for sipping electrons, a whole security system and some sprinklings of specialist digital video circuits to offload DVI/HDMI output.

You can expect a tasty boost in performance - our "real world" MicroPython tests are running up to 2x faster compared to RP2040, and floating point number crunching in C/C++ is up to 20x faster. The extra on-chip RAM will make a big difference when performing memory intensive operations (such as working with higher resolution displays) and even more can be added thanks to external PSRAM support.

RP2350 comes in two flavours - A (standard) and B (all the pins). The B chip has a stonking 48 usable GPIO pins, including 8 ADCs and 24 PWMs, and features on some of our new products. 

What's in the box?

1 x Pico Jumbo (Pico 2 Aboard)

We've gathered up our favourite maker projects from the second year of HackSpace magazine in one place – the Book of Making volume two. It's 180 pages of hands-on guides, tips, tricks, and inspiration.

We show you how to build and launch your own rocket, create electronics circuits with Play-Doh, build your own polyphonic synthesizer, and much more. Whether you've got an hour to build something or you're looking for a weekend project, we've got a range of maker projects to choose from.

• Step into the wonderful world of making
• Be inspired by amazing projects from makerspace communities around the world
• Make your own creations with step-by-step guides
• Perfect projects for an hour, an afternoon, or weekend

What's in the box?

1 x Book of Making

Please note: Raspberry Pi board and jumper cables are not included

This Experimental Platform is for Raspberry Pi 2, 3, 4, 5
Size: 132mm x 108mm
Ideal for use with Solderless 400 Point Breadboard.(included)
Acrylic board locally designed and laser cut inhouse.
Shadows engraved on board for easy component placing

What's in the box?

1 x Acrylic plate
4 x M2.5 x 5 Standoffs
4 x M2.5x6 screws
4 x M2.5 nuts
4 x bumper pads
1 x 400 point breadboard

A Raspberry Pi SSD unlocks outstanding performance for I/O intensive applications on
Raspberry Pi 5 and other devices, including super-fast startup when booting from SSD. It
is a reliable, responsive, and high-performance PCIe Gen 3-compliant SSD capable of fast data transfer, available with 256GB, 512GB or 1TB capacity.

Features

• M.2 2230-format NVMe SSD for Raspberry Pi
• Official Raspberry Pi SSD
• Compatible with Raspberry Pi 5 (when used with a compatible SSD HAT)
• Complies with PCIe Gen 3 standard
• NVMe 1.4 register interface and command set
• Individually packaged in anti-static bags
• Choice of 256GB, 512GB or 1TB capacity
• Reliable and fast storage or boot drive for your Raspberry Pi 5
• Operating temperature: 0℃ to 70℃ (ambient)
• Dimensions: 30mm x 22mm x 1.35mm (2230 format)

What's in the box?

1 x Raspberry Pi SSD - 512GB
1 x Raspberry Pi M.2 HAT

Toshiba alkaline High Power batteries are among the market’s top choice, designed for high performance and longer life.

They have unique features, such as a higher capacity / weight ratio and less toxic ingredients. Toshiba batteries are compatible with all devices and perform very well in high demanding digital devices.

All Toshiba batteries are fully charged and ready to use. They contain no mercury, cadmium and lead, providing a trustful source of energy.

Benefits

- High quality and long lifetime
- Safe, powerful and reliable
- Excellent resistance to leakage
- Superb low temperature characteristics
- Best suited for high drain use

What's in the box?

1 x 9V battery

Creality K2 Plus 3D Printer: Ultimate High-speed Printing for Makers and Professionals

Achieve unprecedented efficiency and scale with the Creality K2 Plus 3D Printer, the latest addition to the K1 series. Designed for Makers, innovators, and professionals, this printer combines high-speed performance, massive build volume, and state-of-the-art features to revolutionize your 3D printing experience.

Why Choose the Creality K2 Plus?

The K2 Plus boasts a CoreXY design and Klipper-based firmware, enabling printing speeds of up to 600mm/s. With a 350x350x350mm build volume, it caters to large-scale projects while maintaining precision and reliability. Whether you're printing with PLA, carbon fiber, or advanced polymers, the K2 Plus delivers exceptional results with ease.

Next-Generation Features

• Ultra-Large Build Volume: A spacious 350x350x350mm print capacity lets you create supersized models in a single run.
• Heated Chamber with Air Purifier: Maintain stable print conditions up to 60°C, ideal for high-performance filaments. The built-in air purifier ensures a clean and controlled environment.
• AI Camera and Nozzle Camera: Monitor prints in real-time and detect potential issues, such as filament buildup, with smart AI capabilities.
• Dual-Gear Direct Drive Extruder: Experience smooth, high-speed filament feeding with a hotend that reaches 350°C. Enhanced cooling ensures flawless layers even at top speeds.
• Automatic Bed Levelling: Featuring a strain gauge sensor and auto tilt calibration, the K2 Plus ensures perfect alignment for every print.

Built for Performance and Convenience

The K2 Plus doesn't just excel in speed and size—it’s designed for user convenience:

• Hands-Free Automation: Auto bed leveling, filament runout detection, and resume functionality let you focus on your projects, not troubleshooting.
• Advanced Connectivity: Transfer files via WiFi, USB, or Ethernet and control the printer remotely using the Creality Cloud App.
• Robust Build: A stable aluminum and steel frame ensures long-term durability, while FOC closed-loop motors enhance precision.

Specifications at a Glance

• Build Volume: 350x350x350mm
• Printing Speed: Up to 600mm/s
• Max Hotend Temp: 350°C
• Chamber Heater Temp: 60°C
• Filament Compatibility: PLA, ABS, TPU, PETG, Carbon Fiber, and more
• Connectivity: WiFi, Ethernet, USB
• Display: 4.3" Color Touchscreen
• Weight: 33.5kg

The Ideal Printer for Makers and Professionals

Whether you're creating prototypes, intricate designs, or large-scale models, the Creality K2 Plus is a game-changer for workshops and professional environments. Pair it with the optional CFS Multicolor Filament Dispenser (sold separately) for even more versatility.

Upgrade your 3D printing game with the Creality K2 Plus—the perfect blend of speed, size, and innovation. Order now and take the first step toward limitless creativity!

What's in the box?

1 x Creality K2 Plus 3D Printer 350x350x350mm

Consumables Accessories Kit for Laser Etcher

Unleash your creativity and enhance your laser etching projects with this Consumable Accessories Kit. 

Features

• Pack of 10 blank ready-made keyrings, perfect for laser engraving and creating personalized designs.
• Crafted from leatherette and genuine walnut veneer, laminated onto sturdy 6mm MDF.
• Perfect for wedding favors, hotel keyrings, and more, these keyrings add a touch of sophistication to any setting. 
• Each keyring measures 30x65mm, offering a 30 x 55mm working space, ideal for personalized engravings.
• Pre-oiled with boiled linseed oil, they are ready for immediate use.

What's in the box?

10 x Rectangular Walnut Keyrings

No more bulky DIN Rail cases for the Arduino Uno or Mega! The DINrPlate is a neat little slim line DIN Rail Mount for Arduino/Genuino Uno and Mega! It's formed of a single plate with mounting holes and strain relief for the USB and Barrel jack cables!

The DINrPlate Features

• Compatible with Ardunio/Genuino Uno and Mega
• Includes base, and screws to mount board
• Integrated strain relief for USB and barrel jack power cables, tie wrap included
• Vertical design uses less DIN rail space (32mm)
• Easy access to all ports and GPIO pins
• Does not include Arduino/Genuino, USB cable, DIN Rail or micro SD.

Specifications

• Industrial grey color blends in well with your other panel components for a professional look.
• High quality Nylon 6/6 material is well suited for industrial environments.
• Large 10mm DIN clip reliably grips rail and will not release without use of a screw driver.
• Easy access to Micro SD card for maintenance.
• Dimensions 7" x 4" x 0.5"

What's in the box?

1 x DINrPlate for uno/mega

Resources

Installation Instructions

1. Screw longer 12mm screws from backside until all the way in.

2. Attach Arduino board to base using included 12mm standoff's.

3. If using a shield, then attach to Arduino and secure with included 6mm screws. Note: Because of the clearance on arduino pin headers, not all screws holes can be used.

4. Insert either USB or DC cable for power.

5. Secure DC cable in place with included tie-wrap, and cut off any excess tie wrap.

6. Attach base to 35mm DIN rail.

This board is designed to dock with a BBC micro:bit using the micro:bit's edge connector. The board is a true CO2 sensor that also measures temperature and relative humidity.

Features

• Low power -- power directly from your micro:bit
• CO2 0-5000ppm, temperature and relative humidity measurement
• Has a makecode library to simplify programming

Please note that this product, while it has many of the same features as the MonkMakes CO2 for micro:bit is based on a completely different sensor and is not a direct replacement for use in the Living Space project (amendments will need to be made to the teacher's notes).

What's in the box?

1 x CO2 Dock for micro:bit (Micro:bit not included)

Resources

https://monkmakes.com/downloads/datasheet_co2_dock.pdf
https://monkmakes.com/downloads/instructions_co2_dock.pdf

Please note: The Raspberry Pi board is not included in this kit. You will have to add the board of your choice to your order. You might also need a matching power supply and HDMI cable if you don't already have them.

• The Raspberry Pi Raphael Starter Kit for Beginners: The Raspberry Pi Raphael Starter Kit for Beginners: The kit offers a rich learning experience for beginners aged 10+. With 337+ components, 161 projects, and 70+ expert-led video lessons, this kit makes learning Raspberry Pi programming and IoT engaging and accessible. Compatible with Raspberry Pi 5/Pi 4B/Pi 3B/Zero 2 W /Pi 400/500, RoHS Compliant
• Expert-Guided Video Lessons: The Raspberry Pi Kit includes 70+ video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in Raspberry Pi programming.
• Wide Range of Hardware: The Raspberry Pi 5 Kit includes a diverse array of components like Camera, Speaker, sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi.
• Supports Multiple Languages: The Raspberry Pi 4 Kit offers versatility with support for 5 programming languages - Python, C, Java, Node.js and Scratch, providing a diverse programming learning experience.
• Dedicated Support: Benefit from our ongoing assistance, including a community forum and timely technical help for a seamless learning experience.

What's in the box?

337 items as per below pic

You will also need.........

• a Raspberry Pi board
• a Power supply
• a Keyboard and mouse
• a HDMI cable

Resources

For this SunFounder Ultimate Raspberry Pi Kit, each lesson shows a circuit diagram, an overview of the operating principles, and an explanation of the code used for the project. Please refer to the Online Tutorials for Raphael Kit.

This is the most affordable camera module available in the market! It is custom-designed to be used with Raspberry Pi single-board computers.

In the example above the camera is connected to a Raspberry Pi 3(Raspberry Pi is not included)

This camera module is compatible with:

• Raspberry Pi 5
• Raspberry Pi 4 Model B
• Raspberry Pi 3 Model B and B+
• Raspberry Pi Zero series

The board itself is tiny, at around 25mm x 20mm x 9mm. It also weighs just over 3 grams, making it perfect for mobile or other applications where size and weight are important. The camera is connected to the CPU on the Raspberry Pi via the CSI bus. This bus travels along the cable (FFC - Flexible Flat Cable) that attaches the camera board to the Pi. 

The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images and also supports 1080p @ 30fps, 720p @ 60fps, and 640x480p 60/90 video.

Specifications

• Sensor: Omnivision OV5647 sensor
• Sensor Size: 1/4” (OV5647)
• Resolution: 5MP 2592×1944
• Video: 
  • 1080p 30 fps
  • 720p 60fps
  • 480p 90fps
• Field of View (FOV): 54°(H), 41°(V)
• Focus Type: Fixed Focus
• Focus Length: 3.60mm
• Focus Distance: 1 m to infinity
• Full-frame SLR lens Equivalent: 35 mm
• Peak Current: 300mA
• Dimension: 25mm x 24mm

What's in the box?

1 x 5MP Camera Module
1 x 15cm 15-15pin FPC cable for Raspberry Pi 2,3,4
1 x 15cm 15-22pin FPC cable for Raspberry Pi 5 and Zero series

Resources

• User Guide
• How to use Arducam OV5647 Camera Module for Raspberry Pi
• Troubleshooting Arducam OV5647 Cameras for Raspberry Pi
• Raspberry Pi Zero W and Pi Camera Application - Use OpenCV
• 3D printable Adjustable Holder - CAD files
• 3D printable Adjustable Holder - Printable Files (3D printer files)

This board is designed to interface to a BBC micro:bit through ring connectors. The board is a true CO2 sensor that also measures temperature and relative humidity.

Features

• Low power -- power directly from your micro:bit
• CO2 0-5000ppm, temperature and relative humidity measurement
• RGB LED indicates CO2 level

What's in the box?

1 x CO2 Mini Kit for micro:bit

Please note: The Raspberry Pi board and Arduino are not included in this kit. You will have to add the board of your choice to your order. You might also need a matching power supply and HDMI cable if you don't already have them.

Features

• All-in-One Solution: The RAB Holder Kit offers you a sturdy base compatible with a range of devices. Whether you're using the Arduino Uno R4/ Wifi/ R3/ Mega R3 or Raspberry Pi 5/ 4/ 3B+/ 3B/ Zero W/ Zero board, it ensures stability for your device. One product to meet all your needs!
• Innovative Companion: Whether you're a DIY enthusiast, a tech expert, or a beginner, the RAB Holder Kit is your perfect tool for bringing ideas to life and experimenting. Keep your workspace tidy and focus on innovation!
• Safety First: We understand how valuable your devices are to you. The RAB Holder Kit is designed to prevent any slips or short circuits, ensuring your projects are always safe and sound.
• Learning and Growth: Whether you're an educator or a student, the RAB Holder Kit is your ideal choice for learning and electronic prototyping. Make learning more engaging and practical!
• Ultimate Platform: Say goodbye to scattered wires and components. The RAB Holder Kit offers a centralized and organized platform, ensuring every project is neat and streamlined.

What's in the box?

1 x RAB Holder 
12 x Screws 
1 x Screwdriver 
6 x Rubber Feets 

You will also need.........

• a Raspberry Pi board
• an Arduino or Arduino compatible board

The Mini Prong soil sensor is a short version of the original Prong sensor that has been specially adapted for use with the Kitronik Greenhouse Kit for BBC micro:bit.

The Mini Prong soil moisture sensor for BBC micro:bit is a sensor board that can be connected to a BBC micro:bit with crocodile clips to monitor the moisture present in the soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.

Mini Prong is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit.

The board has been designed to work with croc-clips, to connect between the Mini Prong and the BBC micro:bit. 

When fitted to the Mini Prong moisture sensor, the micro:bit can be coded via any of the micro:bit editors, such as the Microsoft MakeCode editor. The Datasheet at the foot of this page includes technical information and a MakeCode blocks coding example.

Note:

• To ensure that the mini Prong moisture sensor has a long and fulfilling life, it is better to write your code to perform a moisture check every so often rather than continuously. When the check is performed continuously it promotes rapid erosion of the electrodes.

Features

• Measure soil moisture levels.
• Attach to the micro:bit with crocodile clips.
• Compatible with both BBC micro:bit V1 and BBC micro:bit V2.
• Write code for it with any micro:bit coding editor.

What's in the box?

1 x Prong Soil Moisture Sensor for microbit.

Resources

• Datasheet.
• General Safety Advice.

The Kitronik Pin Breakout for the Raspberry Pi Pico has been designed to offer an easy way of connecting additional circuitry and devices to the Pico. It also allows for moving the Pico between projects without the need to remove all of the jumper cables.

The Pico plugs into the two inner rows of sockets. The remaining two outer rows can then be used for connecting to external devices/circuits. The board has clear markings for each pin and the correct orientation for inserting the Pico is also clearly marked.

In order to use this board, the Pico should have soldered pin headers, it can then be firmly inserted into the board. Additionally, the board features 4 x M3 mounting holes to allow for fixing the board to projects/prototyping setups. Care was taken when designing the Pico Pin Breakout to maintain as small a footprint as possible.

Features

• It offers a convenient interface for controlling additional circuitry with the Raspberry Pi Pico.
• The board features 2 x rows of sockets that a Pico with soldered pin headers can slot straight into.
• The outer rows of sockets can be used to connect any of the Pico i/o pins to a project/prototype.
• Use jumper wires, soldering is not required.
• Raspberry Pi Pico prototyping made easy.

What's in the box?

1 x Kitronik Pin Breakout for the Raspberry Pi Pico.

Resources

• Datasheet.

Get creative by combining the BBC micro:bit and electrical components with Kitronik Craft & Code! Designed by Teachers and tested by Pupils for learners aged 8+

The Kitronik Craft & Code for BBC micro:bit is a fun and engaging way for students to learn about coding as part of wider craft-based projects. Using any version of the BBC micro:bit, this board allows beginners 8+ to design and control various craft projects using MakeCode for micro:bit. MakeCode is an intuitive, block-based coding environment. Everything that is needed is contained within the box, except for the standard classroom craft materials each project requires and the components listed in the 'Requires' section below.

The kit ships with a getting started booklet. The booklet serves as an introduction to the board and the additional supplied parts. It also introduces the user to the micro:bit, the MakeCode editor, writing code with the editor, and how to run programs on the micro:bit. Additionally, the booklet contains two full projects, the documentation walks the user through each project step, including creating the code.

Project 1: Carousel Project - This project will help you craft your tabletop carousel, and then program it to make it run like the real thing! Decorate your carousel with pencils, paint or mixed materials to make it your own. Bonus: We have even included instructions on how to make your own fully-operating safety barrier!

Project 2: Night Light Project - This project will help you to craft your touch-operated night light. Decorate your lampshade with stars, planets or your own design to really make it your own. Touch-operated night lights allow you to choose your brightness level to suit your needs.

Hardware: The kit is supplied with the following hardware; Craft and Code board, a servo, a motor, a pack of crocodile leads, a bulb holder, a bulb, and a finnboard board wheel --for use with the motor in one of the included projects. The hardware is connected to the board using crocodile leads, except for the servo, and the board is clearly marked for connecting the devices.

Power: The board requires 3 x AA batteries (Not included - available separately here.) The board features an AA battery cage on the underside. These batteries power the board, the inserted micro:bit, and the devices attached to the board. The operating voltage of the board is 3.5V - 4.5V, with a max current draw of 470mA (Typical - 350mA). If the board is powered on with no micro:bit inserted, it will draw approximately 9.5mA. To protect the batteries, there is an on/off switch on the board. See the Datasheet for more detailed electrical information.

Coding: The board has been designed for use with the MakeCode Blocks editor for micro:bit. Kitronik has designed a custom MakeCode extension to support the use of the Craft and Code board in the MakeCode editor. This extension contains all of the blocks required to take control of every aspect of the board and the hardware connected to it. It can be added by clicking on the Extensions tab. See the Datasheet for more detailed information on the blocks contained in the extension.

Note:

• A micro:bit is not included. The kit works with both v1 and V2 micro:bits, a V2 micro:bit can be obtained here.
• Batteries are not included. AA batteries can be obtained separately here.
• A USB cable is not included. A USB cable can be obtained separately here.

Features

• It is an innovative environment for beginners to learn about building circuits and constructing projects that incorporate electronics and code.
• The board works with micro:bit V1 & V2.
• The kit is supplied with a servo, a motor, a pack of crocodile leads, a bulb holder, a bulb, and a Finnboard board wheel.
• No tools are required, the included servo connects via a standard connector and all other devices are connected with crocodile leads.
• The board has clear markings to indicate how to connect each device correctly.
• The included printed guide acts as an introduction to the board, MakeCode, coding with the editor, and also includes two projects to work through.
• The projects contain step-by-step guides, including full code examples.
• Kitronik has designed a custom MakeCode extension to support the use of the Craft and Code board in the MakeCode editor.
• The Kitronik Extension features all of the blocks required to take control of the board's features.
• The board requires 3 x AA batteries, which provide power for the board, the micro:bit, and the connected devices.
• Additionally, there is an onboard on/off switch to help prolong the life of the batteries.

What's in the box?

1 x Kitronik Craft & Code boards.
5 x Crocodile Leads, 1/2 a pack of 10.
1 x In-Line Geared TT Hobby Motor with wires - Croc Clips.
1 x Mini 180 Degree Resin Gear Servo SG90.
1 x MES Lamp Holder (with Plastic Base)
1 x MES Bulb 4.5V.
1 x Finnboard wheel, for use as a motor accessory.
1 x Craft and Code Booklet.

Resources

• BBC micro:bit.
• AA Batteries.
• USB Cable.
• General craft materials are required for each experiment.
• Craft and Code board Datasheet.
• Motor Datasheet.
• All Craft and Code assets.
• Booklet Answers Page.