Special Offers
Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0
tp-link 8-Port Gigabit Desktop Switch with 4-Port PoE+ TL-SG1008P
Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0 (with case)
EDATEC Full Aluminium Passive Cooling Open Case for Raspberry Pi 5
R329.90 Inc VAT R359.90
The DINrPlate 2 (DRP2) is a simple, reliable and cost-effective DIN Rail Mount solution for the Raspberry Pi 5/4/3/2/B .
The plate has easy access for all ports and GPIO pins and features a vertical design using just 32mm of DIN space - held with large secure 10mm DIN clips which will not release without the use of a screwdriver.
Integrated strain relief for the power cable has been included in the design (tie wrap included) and the entire plate is made from high-quality 6/6 Nylon (well suited for industrial environments). The SD card is easily accessible for maintenance.
The plate comes in an industrial grey colour to blend in well with other panel components for a professional finish.
Specifications
- DIN clips size: 10mm
- Material: 6.6 Nylon
- Dimensions: 3.6" x 0.4" x 3.6"
- Weight: 0.8 oz
- Colour: Industrial grey
What's in the box?
1 x DINrPlate 2
4 x mounting screws
1 x tie wrap
Resources
- Attach Raspberry Pi board to the base using included four (4) M2 screws and a small Phillips screwdriver (not included).
- Insert the power cable into the Raspberry Pi. Note: Some speciality USB power cables may have a clearance issue with integrated strain relief. If this is the case, use a standard USB power cable.
- Secure power cable in place with included tie-wrap, and cut off any excess tie wrap.
- Attach the base to 35mm DIN rail using a medium-size flat head screwdriver (not included), using a lever action on the flexible side of the DIN rail clip until there is enough clearance to completely grip the DIN rail edges. Use caution when using screwdriver to not bend clip more than is necessary to be attached.
R6,499.90 Inc VAT R6,799.90
The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself, with authentic arcade controls, a high resolution 4:3 display that's ideal for retro gaming, and a punchy speaker to hear those 8-bit game soundtracks at their best
Picade is now Raspberry Pi 4 compatible and includes a new USB-C version of Picade X HAT!
The all-new Picade has been completely redesigned, from the inside out! There's new artwork, a new display and display driver board, dedicated power button, an all-new Picade X HAT (now with USB-C), easier wiring, easier access to the interior of the cabinet, beautiful new packaging, a bunch of extra goodies (stickers and an enamel Picade pin), and a gorgeous Picade poster and assembly instructions.
Picade comes in kit form, and it'll take around two to three hours to build. The cabinet is made from powder-coated MDF, giving it a quality look and feel similar to a full-size arcade. All you'll need to add is a Raspberry Pi, USB-C power supply, and micro-SD card.
Cabinet features
- Black, powder-coated panels
- Acrylic marquee and console with authentic artwork
- Push-fit arcade buttons
- Joystick with black ball top
- 3" speaker (5W, 4Ω)
- Easy access with removable back panel
- Dedicated illuminated power button
- Grippy rubber feet
- Dimensions: 350x230x210mm
10-inch display features
- 1024x768 (4:3 ratio) IPS (wide viewing angle) display
- Pimoroni-designed and manufactured HDMI display driver board and keypad controls
- Powered by micro-USB cable (included) from your Pi
Picade X HAT features
- Easy DuPont connectors for buttons and joystick
- Push-fit speaker terminals
- I2S audio DAC with 3W amplifier (mono)
- Power management, power switch pins, and power button
- 4-way joystick inputs
- 6 player buttons
- 4 utility buttons
- Metal standoffs to hold your Picade X HAT securely
Extras
- Picade enamel pin badge
- Pimoroni Super Sticker Selection
- Picade poster / assembly instructions
What's new!?
The cabinet is more compact, so it fits more neatly on your desk, but has a higher resolution 8" or 10" display (1024x768). The display is driven by a new Pimoroni-designed and manufactured driver board, with keypad controls. It's an IPS panel, so it looks great from any viewing angle!
The all-new Picade X HAT is packed full of useful features. We've moved from more fiddly screw terminals to simple DuPont connectors that just push in, and the speaker terminals are the same easy push-fit connectors that we use on pHAT BEAT.
There's dedicated power management on-board Picade X HAT; just plug your micro-USB power supply into the HAT and it'll power your Pi through its pins. The power button connected to the HAT means that once your Pi is safely shutdown, the power will be cut completely to the Pi. A simple press of the power button will boot your Picade up again.
The new buttons in Picade are lower profile, and the new joystick has a single connector rather than the eight spade connectors on our previous Picade joystick.
A gorgeous new neon-look Picade logo on the marquee, and rainbow stripes on the console and screen-surround, evoke classic consoles, as do the assembly instructions and poster.
Building your Picade
We hope the included assembly instructions have everything you need to build your Picade, but we've also filmed a complete build video of Picade that you can watch as you build and learn some handy tips and tricks. Find it at https://youtu.be/gTgu1fUVsmw
The sections are also available separately in a playlist here.
We've also put together an online tutorial that incorporates the assembly instructions, important tips and amendments, and the videos for each section, so do check that out!
Software setup
We recommend the RetroPie operating system for your Picade. You can download it from the RetroPie website and then burn it to a micro-SD card with Etcher.
Connect a USB keyboard to your Pi, and connect to Wi-Fi in the RetroPie menu. Press F4 to exit to the terminal and then type curl https://get.pimoroni.com/picadehat | bash to run the Picade HAT installer.
Reboot your Pi, if it doesn't prompt you to. Press the "Alt" key on your keyboard and then select "Configure input" to configure your Picade's controls. You'll find that the sound and power button should both be working now too!
Notes
If your Picade display doesn't show anything when you first power it up, then it could be because the HDMI display is not being detected by the Raspberry Pi. This can happen because power isn't supplied to the USB ports on the Raspberry Pi for the first few seconds of booting. The solution is to edit the /boot/config.txt file on your RetroPie SD card, and add hdmi_force_hotplug=1 on a new line at the bottom of the file.
If you'd like to design your own artwork for your Picade, then we've made a handy PDF that has the outlines and dimensions of the marquee, screen shim, and console. You can download it from the Picade HAT GitHub repo here.
Where to find ROMs for RetroPie (free and legally) https://howchoo.com/g/otiwyjhlnzb/where-to-find-roms-for-retropie
and here http://cvaddict.com/article.php?articleid=15
R210.96 Inc VAT R220.90
Note: We have tested this unit successfully on Zero and Zero 2.
The ETH/USB HUB HAT (B) is an Ethernet and USB HUB designed for Raspberry Pi, providing 1x RJ45 Ethernet port and 3x USB 2.0 ports. It's pogo pin design is specialized for Zero series, while the onboard normal USB connector can be used to connect with other Raspberry Pi boards through a USB cable.
Specifications
- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
- Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
- USB HUB connector, for connecting with Raspberry Pi 4B/3B /3A /2B through USB cable
What's in the box ?
1 x ETH/USB HUB HAT (B)
1 x Screws and standoffs pack
Resources
Wiki: ETH/USB_HUB_HAT_(B)
R1,049.90 Inc VAT R1,011.48
Features
- 8× 10/100/1000 Mbps RJ45 ports.
- 4× PoE+ ports transfer data and power on individual cables.
- Works with IEEE 802.3af/at compliant PDs.
- Plug and Play, no configuration and installation required.
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic.
- Supports PoE power up to 30 W for each PoE port.
- Supports PoE power up to 64 W for all PoE ports*.
- Up to 250m data and power transmitting range under Extend Mode**
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Learn more about TP-Link PoE technology >
| HARDWARE FEATURES | |
|---|---|
| Interface | • 8× 10/100/1000 Mbps RJ45 Ports • AUTO Negotiation • AUTO MDI/MDIX |
| Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) |
| Fan Quantity | Fanless |
| Physical Security Lock | Yes |
| External Power Supply | External Power Adapter(Output: 53.5VDC / 1.31A) |
| Packet Forwarding Rate | 11.904 Mpps |
| PoE Ports (RJ45) | • Standard: 802.3 af/at compliant • PoE Ports: Ports 1–4 • Power Supply: 64 W |
| Mac Address Table | 4K |
| Jumbo Frame | 16 KB |
| Switching Capacity | 16 Gbps |
| Dimensions ( W x D x H ) | 6.7×3.9×1.1 in (171×98×27 mm) |
| Max Power Consumption | • 4.7 W (220/50 Hz no PD connected) • 74.39 W (220/50 Hz with 64 W PD connected) |
| Max Heat Dissipation | • 16.03 BTU/h (no PD connected) • 253.67 BTU/h (with 64 W PD connected) |
| SOFTWARE FEATURES | |
|---|---|
| Transmission Method | Store-And-Forward |
| Advanced Functions | • Compatible With IEEE 802.3af/at Compliant PDs • IGMP Snooping • Mac Address Auto-Learning And Auto-Aging • IEEE802.3x Flow Control • 802.1p/DSCP QoS • Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission) • PoE Auto Recovery (Ports 1-4) |
| OTHERS | |
|---|---|
| Certification | CE, FCC, RoHS |
| Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing |
What's in the box?
1 x TL-SG1008P
1 x Power Adapter
1 x Installation Guide
Resources
R265.90 Inc VAT R296.22
The Raspberry Pi E-Ink Display HAT, featuring a 2.13-inch screen with a crisp 250x122 resolution. Equipped with an embedded controller and communicating via the SPI interface, this display supports partial refresh.
Thanks to its remarkable benefits, including exceptionally low power consumption, a broad viewing angle, and the ability to display content without constant electricity, it emerges as the perfect solution for various applications. Its versatility makes it an excellent fit for uses such as shelf labeling, industrial instrumentation, and more.Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
What's in the box?
1 x 2.13inch E-Ink display HAT for Raspberry Pi 250x122
Resources
- Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT
R2,129.90 Inc VAT R2,297.64
This product is a LoRa Gateway module that incorporates a new-generation SX1302/3 normal band chip. It has lots of advantages including long-range transmission, large capacity node, and high receiving sensitivity. In addition, SX1303 supports concurrent communication. Due to the outstanding performance of SX1302/3 on low power consumption, the heat dissipation design of the Gateway can be simplified, thus reducing material cost, also achieving a smaller size.
LoRaWAN Gateway Module features
- Integrates Semtech SX1302/3 normal band and SX1250 radio RF frond-end chip
- Onboard PA and LNA, features +26dBm emit power and -141dBm high sensitivity receiving gain
- The SX1303 supports Fine Timestamp and network positioning based on time difference of arrival (TDOA)
- 52-pin Mini-PCIe socket for easy integration into various embedded systems
- Onboard 4 LED indicators for module operating status
- Comes with development resources and manual (example in C)
HAT features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Incorporate L76K module with GPS/BD support, provide accurate clock and location info for gateway module
- Comes with development resources and manual (example in C)
| BAND CHIP | SX1302 | SX1303 | ||
|---|---|---|---|---|
| 868M | 915M | 868M | 915M | |
| FREQUENCY RANGE | 868M: EU868, IN865, RU864 915M: US915, AU915, KR920 | |||
| POWER SUPPLY | 5V | |||
| MODULATION | LoRa/(G)FSK | |||
| EMIT POWER | +26dBm@5V | |||
| RECEIVING SENSITIVITY | -141dBm@125KHz/SF12 -121dBm@125KHz/SF5 | |||
| OVERALL POWER CONSUMPTION | emitting: 454mA@5V receiving: 42mA@5V sleep: 11mA@5V | emitting: 427mA@5V receiving: 40mA@5V sleep: 8mA@5V | ||
| COMMUNICATION BUS | SPI, I2C | |||
| EXTERNAL CONNECTOR | Mini-PCIe | |||
| OPERATING TEMPERATURE | -40~85℃ | |||
| DIMENSIONS | 50.95 x 30mm | |||
The New Generation LoRa Spread Spectrum Technology,
Higher Anti-Interference Performance, Longer Communication Distance
Network Positioning Based On Time Difference Of Arrival (TDOA)
What's On Board
- SX1302/3 LoRaWAN Gateway module
- Mini-PCIe socket and buckle
- L76K module
- RT9193-33 power chip
- Status indicator
PWR: power indicator
RXD/TXD: UART RX/TX indicator
PPS: GPS status indicator - Raspberry Pi GPIO header
for connecting with Raspberry Pi series boards - L76K antenna connector
- LoRa Gateway antenna connector
- Battery holder
supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
Module Pinout Definition
HAT Pinout Definition
Outline Dimensions
What's in the box?
1 x SX1303 868M LoRaWAN Gateway HAT
Resources
Wiki: www.waveshare.com/wiki/SX1302_LoRaWAN_Gateway_HAT
Argon THRML 30mm Active Cooler (Argon40 active cooler bk)
Argon THRML Active Cooler fits on top of the Raspberry Pi 5 to keep it cool while keeping the small form factor
R99.90 Inc VAT R109.99
Please note: The Raspberry Pi 5 is not included
Features
- Argon THRML Active Cooler fits on top of the Raspberry Pi 5 to keep it cool while keeping the small form factor
- Maximize heat dissipation away from the Raspberry Pi 5 with the large aluminum heatsink
- Tunnel Type Radiator heatsink design to maximize synergy with the active cooling from the 30mm PWM blower fan
- Integrated 30mm PWM blower fan helps cool down the Raspberry Pi 5 faster
- Quick snap on and push pins for easy mounting on Raspberry Pi 5
- Comes in black of silver finish
Specifications
- Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
- Fan speed control: Pulse width modulation control with tachometer
- Maximum airflow: 1.09 CFM
- Maximum fan speed: 8000 RPM +/- 15%
- Product material: Aluminum
What's in the box?
1 x active cooler
You might also need a sporty cover to protect your Pi
Resources
Argon THRML 30-AC Instruction Guide
R298.90 Inc VAT R324.90
Note: We have tested this unit successfully on Zero and Zero 2.
The ETH/USB HUB HAT (B) is an Ethernet and USB HUB designed for Raspberry Pi, providing 1x RJ45 Ethernet port and 3x USB 2.0 ports. It's pogo pin design is specialized for Zero series, while the onboard normal USB connector can be used to connect with other Raspberry Pi boards through a USB cable.
Specifications
- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
- Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
- USB HUB connector, for connecting with Raspberry Pi 4B/3B /3A /2B through USB cable
Two different lids included
What's in the box ?
1 x ETH/USB HUB HAT (B)
1 x ABS case
1 x Rubber feet 4PCS
1 x Screws pack
Screwdriver x1
Resources
Wiki: ETH/USB_HUB_HAT_(B)
R299.90 Inc VAT R379.90
We're aware that the Raspberry Pi 5 generates significant heat due to its powerful nature. If you're seeking a maintenance-free solution, this case/enclosure is perfect for you. It functions as a substantial heatsink while also serving as a case for the Raspberry Pi 5. This design saves you the expense of purchasing separate heatsinks and cases. The aluminum comes with two options case, Open and Close case. The case construction of this Raspberry Pi 5 case provides 10-15°C of passive cooling for Open case and can go up to 25°C for Close case. It's an ideal choice for scenarios requiring completely silent cooling, such as home media centers. Additionally, it offers easy access to your RPi I/O connectors!
Note: Only Black colour option is available for now.
Full Aluminum Passive Cooling Open Case for Raspberry Pi 5
What's in the box?
1 x Full Aluminum Case for Raspberry Pi 5
Resources
More info : https://magpi.raspberrypi.com/articles/raspberry-pi-5-cases-group-test
https://youtu.be/uOdaYrvMqxc
R239.00 Inc VAT R246.90
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Fan speed / Cooling: 0 - 50%
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG Blue (1.75mm)
R239.90 Inc VAT R246.90
PETG is short for polyethylene terephthalate glycol-modified
PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.
Print temp : 235 – 255°C
Heated Bed : 65 – 85°C
Fan speed / Cooling: 0 - 50%
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg
What's in the box ?
1 x SA Filament PETG White (1.75mm)
Argon ONE V3 M.2 NVME PCIE Case for RPi5 (Argon One V3 M.2 Pi5)
Argon ONE V3 M.2 NVME Case is now made compatible for Raspberry Pi 5 with upgraded features and all new black finish
R899.90 Inc VAT R949.90
- Argon ONE V3 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support.(NVME drive is not included)
- Boot your Raspberry Pi 5 from an NVME M.2 Drive.
- Built-in HEATSINK for your M.2 NVME Drive
- Enjoy faster and higher storage access by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5
- Versatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size
- Greater thermal management on M.2 NVME with included aluminum heatsink specific to M.2 drive to keep it cool, efficient and working longer
- Reliable and consistent data transfer with included FPC impedance controlled cable
- Argon ONE V3 M.2 NVME Case is now made compatible for Raspberry Pi 5 with upgraded features and all new black finish.
- Better Active Cooling with the blower type PWM programmable 30mm fan. Repositioned within the case to be more efficient and quiet.
- Improved Passive Cooling with the addition of heatsink on the power management chip of the Raspberry Pi 5 aside from its CPU, which both get hot during heavy use.
- Better communication and power management with the Raspberry Pi 5 thru Raspberry Pi's RP2040 chip, which controls the features and functions of the Argon ONE V3, like fan speed, power management state (e.g. boot manually or automatically after a power outage by simply setting the jumper pins inside the case) allowing you to use the Argon ONE however you see fit.
- Power button located at the back can perform the following with the installation of a open sourced script allows for safe shutdown, reboot and forced shutdown
- Cable management remains exquisite with two full-sized HDMI ports neatly placed at the back allows the Raspberry Pi 5 to use two monitors simultaneously
- Sleek magnetic cover to the access port of the custom color coded GPIO Pins.
- Built-in IR receiver allows the Argon ONE V3 to be easily usable with the Argon IR remote meaning the case now makes for an even better media player!
- Enjoy using your audio accessories with the OPTIONAL 3.5mm audio jack via the internal DAC audio board upgrade (see separate listing)
What's in the box?
1 x Argon ONE V3 Aluminum Case
You might also like....Elevate your RPi 5 sound experience by adding an Argon BLSTR Dac to your order.
Resources
Argon One V3 M.2 NVME PCIE Case manual
M.2 NVMe Drive Compatibility:
Other drives may also be compatible but we have not tested them yet.
Western Digital SN850
Western Digital SN740
Western Digital SN570
Western Digital SN530
Western Digital Black SN750 SE (Phison Controller)
Team MP33
Samsung 980 Pro
Samsung 980
Sabrent Rocket Nano
Sabrent Rocket 4.0
PNY CS1030
Origin Inception TLC830 Pro NVMe
Netac NV3000 NVMe SSD
Netac NV2000 NVMe SSD
Lexar NM710
Lexar NM620
Kioxia Exceria NVMe SSD
Kioxia Exceria G2 NVMe SSD
Kingston KC3000
Kingston SNV2S NV2 Gen4 PCIe NVMe M.2 2280 Solid-State Drive
Inland PCIe NVMe SSD
Crucial P3 Plus M.2
Crucial P3 M.2
Crucial P2 M.2
Axe Memory Generic Drive
AData XPG SX8200 Pro
Argon NEO 5 M.2 NVME PCIE Case for Raspberry Pi 5 (Argon NEO 5 M.2)
Argon NEO 5 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support.
R649.90 Inc VAT R699.90
- Argon NEO 5 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support.
- Boot your Raspberry Pi 5 from an NVME M.2 Drive.
- Built-in HEATSINK for your M.2 NVME Drive
- Enjoy faster and higher storage access by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5
- Versatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size
- Greater thermal management on M.2 NVME with included aluminum heatsink specific to M.2 drive to keep it cool, efficient and working longer
- Reliable and consistent data transfer with included FPC impedance controlled cable
What's in the box?
1 x Argon NEO 5 M.2 NVMeCase
Resources
M.2 NVMe Drive Compatibility:
Other drives may also be compatible but we have not tested yet.
Western Digital SN850
Western Digital SN740
Western Digital SN570
Western Digital SN530
Western Digital Black SN750 SE (Phison Controller)
Team MP33
Samsung 980 Pro
Samsung 980
Sabrent Rocket Nano
Sabrent Rocket 4.0
PNY CS1030
Origin Inception TLC830 Pro NVMe
Netac NV3000 NVMe SSD
Netac NV2000 NVMe SSD
Lexar NM710
Lexar NM620
Kioxia Exceria NVMe SSD
Kioxia Exceria G2 NVMe SSD
Kingston KC3000
Kingston SNV2S NV2 Gen4 PCIe NVMe M.2 2280 Solid-State Drive
Inland PCIe NVMe SSD
Crucial P3 Plus M.2
Crucial P3 M.2
Crucial P2 M.2
Axe Memory Generic Drive
R179.89 Inc VAT R199.90
The Raspberry Pi Display 2 Stand is a custom-designed, sturdy accessory to securely hold the official Raspberry Pi 7-inch touchscreen display in an optimal position.
Features
- Compatibility: Tailored to fit the Raspberry Pi Display 2 and integrate seamlessly with various Raspberry Pi models like the Raspberry Pi 5 or Raspberry Pi 4.
- Material: Crafted from black and clear acrylic.
- Cable Management: The front of the display is raised to house keyboard cables. The stands have openings to route cables neatly if necessary eg mouse cable.
- Compact Design: Lightweight and space-saving, perfect for desks, workbenches, or portable setups.
- Easy Assembly: Comes with all necessary screws and tools for quick setup.
Ideal for use in DIY projects, kiosks, media centers, or as a control interface, the Raspberry Pi Display 2 Stand enhances usability and provides a stable foundation for your Raspberry Pi touchscreen setup.
What's in the box?
1 x Acrylic frame for Raspberry Pi Display 2
DIN Rail Mounts pair (CT Din rail brackets)
This DIN rail bracket is a reliable mounting accessory designed to secure electronic components, circuit boards, and terminal blocks onto standard DIN rails commonly used in industrial automation, electrical enclosures, and control panels.
R53.94 Inc VAT R24.90
This DIN rail bracket is a reliable mounting accessory designed to secure electronic components, circuit boards, and terminal blocks onto standard DIN rails commonly used in industrial automation, electrical enclosures, and control panels. It ensures stable and organized installation, preventing movement or disconnection due to vibrations or mechanical stress. Made from high-quality insulating plastic, it provides excellent durability and protection against environmental factors, ensuring long-term performance in industrial settings.
With its pre-drilled holes and included screws, this bracket allows for quick and hassle-free installation, reducing assembly time and maintenance efforts. It is compatible with various industrial components such as relays, power supplies, PLC modules, and circuit protection devices, making it an essential accessory for control systems and wiring applications. Whether used in electrical cabinets, automation systems, or industrial machinery, this DIN rail bracket enhances organization and efficiency in any setup.
Features
- Material: PA66V0
- Wiring Method: Track Wiring
- Colour Classification: DRG-01
- Compatible with M3x10mm screw
- Supports standard DIN rails dimensions (Width: 35mm Height:7.5mm)
What's in the box?
2 x DIN Rail Bracket
4 x M3 Screw (10mm)
R173.83 Inc VAT R199.90
Specifications
- Module Type: Buck converter
- Input: 8V to 90V
- Output: 5V
- Output current: 5A(max)
- Conversion efficiency: up to 96%
- Size: 46mm x 32mm x 18mm
1 x 5V 5A Power Adapter